Unless the 12-speed in question has a highly custom architecture and is designed for a very specific drivetrain, it should operate on an acceptable level with an 11-speed chainring. The…
Good news. Tiagra shifters can be combined with Ultegra's mech. Rear Compatibility Tiagra 4500 rear shifters are compatible with Ultegra's 10-speed rear derailleurs. Tiagra 4600 rear shifters can work with…
SRAM rotors are compatible with TRP brakes only when the following requirements are satisfied: The rotor's diameter should be the correct size for the brake calipers. The rotor's thickness shouldn't…
Condensed answer: KMC's 12-speed chains are designed for 12-speed drivetrains of any kind and are therefore fully compatible with SRAM Eagle's cassette and rear derailleur. A List of KMC Chains…
An 11-speed chain can technically be used in conjunction with an 8-speed cassette, but the combination is not recommended unless there is no other option to get the bike running…
An 11-speed chain can be used on a single-speed bike, but only when the rear cog and the chainring are of the correct thickness for the chain. The standard single-speed…
If the hub is 7-speed specific, installing a 9-speed cassette on it is impossible because the freehub body is too short. If the hub isn’t 7-speed specific and uses a…
A 9-speed chain can be used on a single-speed bike but only when the chainring is of the correct width for the chain. A narrow-wide chainring or one taken from…
Disc wheels are banned in some competitions to minimize the chances of accidents caused by the wind. Disc wheels are solid and could act as a boat sail. If there's…
The internal width of bicycle chains designed for 9/10/11/12 is identical and consequently, it's possible to use a 9-speed chain with a narrow-wide setup. However, the outer width of 9-speed…