Quick Comparison Of 24 and 32-Spoke Wheels
This post compares the advantages and disadvantages of 24 and 32-spoke wheels. The Advantages of 24-spoke Wheels Aerodynamics The main motivation to put fewer spokes on a wheel is to…
This post compares the advantages and disadvantages of 24 and 32-spoke wheels. The Advantages of 24-spoke Wheels Aerodynamics The main motivation to put fewer spokes on a wheel is to…
Condensed answer: 25mm tires can be installed on rims with a 21mm internal rim width. However, there are some downsides to this combination. Average road rims have a 15-18mm internal…
Condensed Answer: A mullet bike facilitates jumping because the rear wheel is lighter, easier to lift, and less likely to come in contact with the rider's body during a jump.…
27.5" wheels and bikes aren't dead yet, but the data shows that their glory days are over.Manufacturers produce what sells and see little incentive to offer a wide spectrum of…
Condensed Info: 2.6" tires can technically be installed on rims with 40mm internal width, but in most cases, they will be too narrow. 40mm rims are designed for 3" or…
2.8" tires are a bit too wide for rims with 30mm internal width. That said, the combination could still work to a satisfactory level. If maximum performance is needed, going…
35mm rims are normally combined with 2.8"+ tires. Nonetheless, a 2.4" tire can still be installed on a 35mm rim. In some cases, the fit could be a bit tight,…
Most BMX forks are the same size or extremely close. Brands follow an industry standard for maximum compatibility and to ensure that their forks do not cause major changes to…
Condensed Answer: BMX tires are fat (wide) for the following reasons: Suspension effect Lower chances of getting a flat tire Rim protection Extra Grip Wider Tires = Softer Ride Wider…
A front BMX hub can be installed on the front wheel of a fixie. The procedure will more than likely require new spokes of a different length. A rear BMX…