Is a 73 Degree Seat Tube Angle Too Slack (fast answer + a comparison chart)
Condensed Answer: A 73° seat tube angle is 1° to 4° slacker than what we find on modern MTBs. In the world of road bikes, 73° is a common middle…
Condensed Answer: A 73° seat tube angle is 1° to 4° slacker than what we find on modern MTBs. In the world of road bikes, 73° is a common middle…
A 17-inch MTB frame will fit a person with an inseam measurement of about 82cm or 32.3 inches. In a specific context, taller individuals with a longer inseam can also…
This post compares the advantages and disadvantages of 1x10 and 1x12 MTB drivetrains. The Advantages of 1x10 Affordable 1x The main advantage of 1x10 is that all the parts cost…
This post compares the advantages and disadvantages of 2x11 and 1x12 drivetrains. The Advantages of 2x11 Drivetrains Wide Range Gearing 2x11 comes with 2 chainrings offering all the gears that…
This post compares the advantages and disadvantages of 1x12 and 2x10 drivetrains. The Advantages of 1x12 Drivetrains Simplicity & Elegance Two of the main incentives to go for a 1x…
Condensed answer: A negative stem positions the handlebars lower and allows the rider to shift more of their weight on the front wheel. The result is a more aerodynamic stance…
Condensed Answer: Slick tires can be installed on an MTB, although the number of available models is lower in comparison to knobby tires. Once an MTB is equipped with slick…
This post compares the advantages and disadvantages of 2.1" and 2.3" MTB tires. Weight Comparison The table below compares the weight of 2.1" and 2.3" MTB tires: 2.1" / 53mmWeight2.3"…
Condensed Answer: A mullet bike facilitates jumping because the rear wheel is lighter, easier to lift, and less likely to come in contact with the rider's body during a jump.…
Condensed Answer: In some cases, it might be possible to install 29" wheels on a 26 bike, but more often than not the fork and/or the frame will not have…