Downtube Shifters vs. Bar-end Shifters
This post compares the pros and cons of downtube and bar-end shifters in regards to one another. The Advantages of Downtube Shifters 1. Simplistic Cable and Housing Routing Downtube shifters…
This post compares the pros and cons of downtube and bar-end shifters in regards to one another. The Advantages of Downtube Shifters 1. Simplistic Cable and Housing Routing Downtube shifters…
Condensed answer: Some 27.5-inch forks have the clearance to accept a 29-inch wheel. However, the conversion makes the gap between the tire and fork's arch noticeably smaller. As a result,…
This post compares carbon and steel forks. The Main Differences Between Carbon and Steel Forks 1. Compliance In general, steel forks are more compliant than carbon forks. In this case, the…
Condensed Answer: Shimano cleats are incompatible with Crank Brothers pedals. If you have Crank Brothers pedals and Shimano shoes, you have to unmount the original cleats and mount the cleats…
Condensed answer: SRAM rotors can be used with Shimano disc brakes. The diameter of the rotors should match the system's settings. The rotors have to be compatible with the wheel's…
Condensed Answer: SRAM and Shimano hydraulic brakes require a different bleeding process. The bleeding kits designed for each brand reflect the dissimilarities. That said, it's possible to use parts of…
Condensed Answer: For optimal performance, it's best to use components part of the same groupset. Nonetheless, people have been mixing SRAM eTap derailleurs with Shimano chains, cassettes and chainsets successfully.…
Condensed answer: Shimano rotors can be combined with SRAM brakes. In some cases, you will need an adapter or an extra washer to increase clearance. Requirements for Compatibility 1. Rotor…
Condensed Answer: A SRAM PowerLink can be used on a Shimano chain as long as both are designed for the same number of speeds. Some people use PowerLinks intentionally for…
Condensed Answer: A road bike chain can be used on a mountain bike as long as it's long enough and matches the number of speeds on the cassette/freewheel. In general,…