Can I Use a 700×35 Tube In a 700×32 Tire? (simple answer)
Condensed Answer: In most cases, a 700x35 inner tube can be successfully coupled with a 700x32 tire. That said, there are some downsides to using an inner tube wider than…
Can I Use a 700×28 Tube In A 700×25 Tire?
Condensed Answer: Technically, a 700x28 inner tube can be used with a 700x25 tire. However, the extra size of the tube makes the installation of the inner tube and respectively…
Can I Use a 700×23 Tube In a 700x25c Tire?
Condensed Answer: In most cases, a 700x23c tube can be used with a 700x25c tire because inner tubes are elastic and the nominal difference between a 23mm and a 25mm…
The Front Derailleur Won’t Move Far Enough (explanation & solutions)
Description of the Problem When the rider tries to shift onto the largest cog, the front derailleur doesn't move sufficiently to make the transition. As a result, the cyclist cannot…
Bike Tire “Popping” Out of the Rim During Inflation (explanation & solutions)
Description of the Problem During inflation of the inner tube, the tire pops out of the rim and presses the inner tube against the rim. The contact between the rim…
Can I Replace a 700×23c Tire With a 700×28c one? (simple answer)
Condensed Answer: 700x23c wheels can be replaced with 700x28c ones under two conditions:1. The rims have to support the new tire size.2. The fork and frame should have enough clearance…
Why Is My Fixed Gear Slipping? (Analysis & Solutions)
There are two main reasons why a fixed-gear bike would be "slipping" – lost chain tension or a loose rear cog. Option 1– Lost Chain TensionDescription. The rear wheel of…
Why Do Track Bikes Have One Solid Wheel?
Condensed Answer: The purpose of disc/solid wheels found on track bikes is to reduce the drag created by standard spoke wheels. The improved aerodynamic properties have a measurable effect on…
Why Do Track Cyclists Use Toe Clips?
Condensed Answer: In the past, track cyclists relied on toe clips to prevent their feet from coming off the pedals. Currently, toe clips are found only on rented track bikes…
Are Press-fit Bottom Brackets Bad? (simple answer)
This post presents the advantages and disadvantages of press-fit bottom brackets. Definitions Bottom bracket – a system of bearings and cups allowing a spindle connected to the crank arms to…