Can You Put a 23mm Tire On a 25mm Rim? (fast answer)
Condensed Answer: If the rim has а 25mm external width, then there's a high chance that it will work just fine with a 23mm tire. If the internal rim width…
24 vs. 32 Spokes Wheels (Full Comparison)
This post compares the advantages and disadvantages of 24 and 32-spoke wheels. The Advantages of 24-spoke Wheels Aerodynamics The main motivation to put fewer spokes on a wheel is to…
Can You Put a 25mm Tire On a 21mm Rim? (fast answer)
Condensed answer: 25mm tires can be installed on rims with a 21mm internal rim width. However, there are some downsides to this combination. Average road rims have a 15-18mm internal…
Are Mullet Bikes Good For Jumping? (fast answer)
Condensed Answer: A mullet bike facilitates jumping because the rear wheel is lighter, easier to lift, and less likely to come in contact with the rider's body during a jump.…
Are 27.5″ Wheels Dead? (super fast answer)
Condensed answer: 27.5" wheels and bikes aren't dead yet, but the data shows that their glory days are over.Manufacturers produce what sells and see little incentive to offer a wide…
Can You Put 2.6″ Tires On 40mm Rims? (fast answer)
Condensed Answer: 2.6" tires can technically be installed on rims with 40mm internal width, but in most cases, they will be too narrow. 40mm rims are designed for 3" or…
Can You Put 2.8″ Tires On 30mm Rims? (fast answer)
Condensed Answer: 2.8" tires are a bit too wide for rims with 30mm internal width. That said, the combination could still work to a satisfactory level. If maximum performance is…
Can You Put 2.4″ Tires On a 35mm Rim? (ultra-fast answer)
Condensed Answer: 35mm rims are normally combined with 2.8"+ tires. Nonetheless, a 2.4" tire can still be installed on a 35mm rim. In some cases, the fit could be a…
Can You Put a BMX Hub On a Fixie? (ultra-fast answer)
Condensed answer: A front BMX hub can be installed on the front wheel of a fixie. The procedure will more than likely require new spokes of a different length. A…
Do Bike Pedals Self-Tighten? (fastest answer)
Condensed Answer: Bike pedals self-tighten as the rider pedals. This is accomplished via the strategic choice of thread direction on the pedal axles. The drive-side pedal tightens clockwise while the…