Can I Use a 700×35 Tube In a 700×32 Tire? (simple answer)
Condensed Answer: In most cases, a 700x35 inner tube can be successfully coupled with a 700x32 tire. That said, there are some downsides to using an inner tube wider than…
Condensed Answer: In most cases, a 700x35 inner tube can be successfully coupled with a 700x32 tire. That said, there are some downsides to using an inner tube wider than…
Condensed Answer: Technically, a 700x28 inner tube can be used with a 700x25 tire. However, the extra size of the tube makes the installation of the inner tube and respectively…
Description of the Problem When the rider tries to shift onto the largest cog, the front derailleur doesn't move sufficiently to make the transition. As a result, the cyclist cannot…
Description of the Problem During inflation of the inner tube, the tire pops out of the rim and presses the inner tube against the rim. The contact between the rim…
Condensed Answer: Technically, the attachment mechanism of V-brake pads allows users to install them on caliper brakes. However, V-brake pads are significantly longer than the models designed for caliper brakes.…
Condensed Answer: Pegs can be installed on a cruiser bike as long as its hubs have solid axles or female BMX axles. If the cruiser bike uses regular hollow axles,…
Description of the Problem When inflated, the rear tire comes in contact with the frame right away or when rotating the wheel. Solutions The Tubes of a Bike Frame There…
Condensed Answer:If the big chainring attaches to the drive-side crank via bolts, it's possible to replace it without removing the cranks.If the chainring is permanently attached to the cranks via…
Condensed Answer: Cassette hubs cannot accept freewheels; nor can freewheel hubs accept a cassette.The freehub body of a cassette hub is shaped specifically for a cassette. Meanwhile, freewheels and freewheel…
Condensed Answer: Carbon seat posts can be clamped if they're round. However, carbon has poor resistance to compression, and the clamp shouldn't be overtightened to avoid damaging the component. It's…